As seen on "American Pickers"

Yes, it finally happened and the guys pulled an Alemite out of a barn in South Dakota.

View fullsize

Will the prices on these beautiful cabinets rise now?

Will we possibly see more come out from hiding?

The shows prices were inflated, but glad to see an Alemite getting some appreciation.

Bringing in the New Year

May everyone find the work station of their dreams this year!

A.S.I. - Auto Service Industry show

From at least 1938 through the 50’s the Automotive Service Industry Show at Navy Pier in Chicago was the main place for suppliers to show off their new products. The shows / conventions were highly attended; around 21,000+ people in their peak years of 1947 and 48 and 500-600 manufacturers . There was no show in 1949 and by 1950 the numbers began to drop off. (16,000)

The Alemite display booth was well attended, with a merchandiser displayed right in the center. Some displays cost north of $10,000 at the time, and companies used everything from key rings to smoking pipes to attract visitors.

The show floor; 1938

The Shure Sales Promotion Manager, Stan Lenehan, at the International A.S.I. show with one of the first Shure Mfg. Merchandisers

View fullsize

The Show floor in 1946; I can see a Graco booth on left along with many other companies

Museum collection of Alemite cabinets

In a back barn area of the The Big Horn County Historical Museum in Hardin, Montana, sits this time capsule of Lubricating Equipment.

The ARO service merchandiser

With only two pictures of their elusive work stations, this ARO cabinet may be one of the more rare units out there.

Possessing an indented single stainless trim piece across the top of the cabinets and a study center bench, the ARO merchandiser appears to be able to take a variety of different center sections. Much of the benches details, like hinges, handles and proportions, tend to have me believe that they may have been built out of surplus Lincoln Engineering units. We have not seen the rectangular ARO emblem until January 1948 and after, so that is the best gauge of when these cabinets would have been manufactured.

If you have one of these workbenches, please reach out to us.

1949 Buick Lubricare photo ad

Update

Here is a ARO bench with a different style to the top of the cabinets.

Workbenches in unique color schemes

Here are some fun color ways we have seen over the years

View fullsize

View fullsize

View fullsize

View fullsize

and here are 2 Texaco themed benches with a lot going on

View fullsize

View fullsize

The collection of "Motor Age" magazines grows for our archive

We have been acquiring Chilton's “Motor Age” magazines for our history collection, and these are the Merchandiser related ads or images found within.  These are mostly from 1949-1950.

And here are some of the issues from 1940-1942.

1948 Lincoln sectional merchandiser

In this Lincoln Engineering bulletin sent to us by a friend of the site; you can get a glimpse of one of their more rare configurations.

You could order any combination you desired of these shorter work station setups. 

Although we do not have a picture of one of these cabinets complete, here are the side cabinets by themselves.

36 Lincoln's in one dealership

Trevellyan Oldsmobile in Lansing Michigan purchased 36 Lincoln merchandisers for their upgraded service department in 1946.

View fullsize

Sun Test Equipment Wall Cabinet

We had never seen one of these unique cabinets in person before, so we decided to bring it on back with us.

The Diagnosis Cabinet was built around 1948-1951 and allowed the mechanic to tuck away their Sun Test equipment.  It came with a writing desk in the center and a top illuminated glass display.  We love the curved cast metal end caps.  Below is the original catalog ad from 1950.

Below you can see what the original Sun signage would have looked like.

This is not a small unit.  Measuring in at 13 feet wide, 17 inches deep, and 7 and a half feet tall.  Here is cabinet as found in its original mechanics garage.

The exceptional Kent-Moore Turret model bench

For many years we have longed to receive any conformation that Kent-Moore actually produced this Work Station with round sliding side-cabinets.

Only possessing literature, and small hints at the bottom of Motor Age ads, we began to accept that we may never see one in the wild...

...until a new acquaintance was made, with stories to tell and images to share.

With a huge thank you to our friend of the site,

We present you with the Kent-Moore "Dual-Turret" Merchandiser with a center bench from slightly earlier model.

In the same month that we finally received photographic proof of this model; this single Turret above showed up in Texas and is now in our collection.

Notice how the door swings from the attachment to the center pole. There is no contact between the door and the outer cylinder until it closes all the way.

Also confirmed is that there are three threaded holes underneath the cabinet for optional factory wheels.

The Work Station that got us started...

1949 Alemite

I found this merchandiser years ago and purchased it.  The fact that there was not much information on these workbenches online, is the reason we started collecting vintage literature and photos.

  This began our quest to uncover the full history of these different models.

Proof of the earliest Work Station finally found

There had been stories of a Workbench built by Balcrank, but not till this week did we have an image or any more information.

We found this ad in a 1940 "Shields Harper" Service Equipment Catalog.  Look at all the details and specs!

1948 All Original Graco has a new home

We recently sold off this complete Merchandiser.

It is still one of three Graco’s we have seen with the original, beveled, dealer glass intact.  In this original state, it went off to become a display in a private collection.

A complete Lube gun set went along with it.